1. Check your IPv4 DNS Server Address. (Example: 10.0.28.82)
2. Open Command Prompt. Click START > ALL PROGRAMS > COMMAND PROMPT.
3. Ping your IPv4 DNS Server. Type ping -l 100 10.0.28.82 -t then press ENTER.4. See how it works. Don't close the Command Prompt, Just minimize it.
NOTE:
When you ping your IPv4 DNS Server, Command Prompt will show "Reply from 10.0.28.82: bytes=100 time=1960ms - 708ms TTL=59.
You may change the bytes higher, but do not change too higher.
No comments:
Post a Comment